Subscribe to RSS feed

DGK Electronics

  • Home
  • About me
  • Electronics projects

How to add a logo to a copper layer on KiCAD

Posted by Kalle Hyvönen Posted on May - 24 - 2012
Categories: KiCad Tutorial

7 Responses so far.


  1. John says:
    10/02/2016 at 12:45
    Reply
    • Kalle Hyvönen says:
      10/02/2016 at 12:59
      Reply
  2. vs3 says:
    17/12/2013 at 08:16
    Reply
  3. Mark says:
    12/08/2012 at 18:51
    Reply
    • Kalle Hyvönen says:
      12/08/2012 at 19:04
      Reply
      • Chris Gammell says:
        16/08/2013 at 18:00
        Reply
    • David says:
      05/12/2012 at 05:55
      Reply

Leave a Reply to Chris Gammell

Click here to cancel reply.

Sponsors


Tweets by @DGKelectronics
  • Recent Posts


    • Microwave Noise Source
    • High-voltage Differential Probe
    • Tip: How to Measure Small Resistances
    • Quick Project: Inductor Saturation Current Tester
    • Implementing an all digital phase-locked loop
  • Categories


    • All posts
      • Electronics projects
        • Aquarium lighting
        • Current adapter
        • DDS function generator
        • GA250 programming box
        • HF converter
        • HV differential probe
        • Induction heater
        • Inductor saturation current tester
        • Laser diode driver
        • Noise source
        • OLED-display
        • PSP display driver
        • Radar
        • Radiation detector
        • RF
        • SDR radio
        • USB-to-1-wire adapter
      • KiCad Tutorial
      • Product reviews
      • Programming
      • Radio control stuff
        • Assan GA250
        • FrSky
        • Turnigy 9X
      • Uncategorized
  • Links


    Aki Korhonen

    EEWeb's Online Scientific Calculator
    EEweb Europe Electronics forum

  • DGK electronics FeedBurner


  • Tags


    1-wire arduino c++ DDS EDA GA250 inkscape KiCad measurement microwaves OLED PCB pin-diode python radiation detector Radio control stuff RF rotary encoder SDR smps SolidWorks Turnigy 9X tutorial ucurrent USB
  • Meta

    • Log in
    • Entries feed
    • Comments feed
    • WordPress.org
  • Archives

    • May 2015
    • September 2014
    • August 2014
    • February 2014
    • October 2013
    • September 2013
    • January 2013
    • December 2012
    • November 2012
    • October 2012
    • August 2012
    • July 2012
    • May 2012
    • April 2012
    • March 2012
  • Recent Comments

    • Niels on 9 GHz doppler radar
    • Vladyslav Prodanchuk on Using a neat little OLED-display with an Arduino
    • Kalle Hyvönen on FPGA based PlayStation Portable display driver
    • Ma on FPGA based PlayStation Portable display driver
    • Dkon on HF converter for SDR radios