SWR bridge, detector output at 2.45GHz

SWR bridge, AD8319 detector output at 2.45GHz. SMA terminator is some terminator I had laying around. HP terminator is from a 85032E calibration kit, attached with adapters. Inf. load is with nothing connected on the load port.

Categories:

One Response so far.


  1. Hallo,

    I am interesseted on a 4,3 GHZ Horn Antenna and the SWR bridge
    detector.I need this for a Radio-altimeter project.

    Cordially Hubertus
    Berlin/Germany

Leave a Reply